Automatic Head Softener F117Q1 Inlet/outlet 3/4” (flow 2.5m3/h)
 
The Automatic Head Softener F117Q1 Inlet/outlet 3/4” (flow 2.5m3/h) is a high-quality filter valve designed for use in water treatment systems. It is a 1" valve with a maximum flow rate of 6m3/h and is suitable for use with water temperatures between 5°C and 50°C.
 
Technical Parameters:
Water Pressure: 0.15-0.6 MPa
Water Temperature: 5°C-50°C
Transformer Output: DC12V, 1.5A
Water Turbidity: <20 FTU
Inlet/Outlet: 1" F
Drain: 1" F
Base: 2.5"-8NPSM
Riser Pipe: 1.05" OD
Max Flow Rate: 6m3/h
Suitable Tank Size (in): 6"-10"
 
Product Characteristics:
Automatic filter valve with hermetic head faces and high degree pottery and corrosion resistance.
LED display shows the filter valve's operating status.
Rinsing frequency can be set.
Two types of time clock available: by hours or by days.
Buttons are locked when no operation within 1 minute.
Interlock function available.
Signal output connector available.
Remote handling input connector available.
Pressure relief connector available.
All parameters can be modified according to the need.
 
Installation Instructions:
1. Ensure the valve is installed in a vertical position.
2. Connect the inlet and outlet pipes to the valve according to the manufacturer's instructions.
3. Tighten all connections securely to prevent leaks.
4. Connect the drain pipe to the valve according to the manufacturer's instructions.
 
Operation:
1. Press the "Start" button to initiate the rinse cycle.
2. The LED screen will display "Rinse" and the valve will open to allow water to pass through.
3. The valve will close automatically after the rinse cycle is complete.
4. To set the rinsing frequency, press the "Menu" button and select "Rinse Time".
5. To set the time clock, press the "Menu" button and select "Time Clock".
 
Maintenance:
Regularly inspect the valve for signs of wear or damage and replace as necessary.
Clean the valve and surrounding area regularly to prevent mineral buildup and corrosion.
Lubricate moving parts regularly to prevent sticking.
 
Troubleshooting:
If the valve is difficult to turn, check for mineral buildup and clean as necessary.
If the valve does not open or close properly, check for blockages or damage and replace as necessary.